New

6ES7146-6FF00-0BB0

Condition: New product

More info

Siemens 6ES7146-6FF00-0BB0

SIMATIC ET 200eco PN, F-DI 4x, F-DQ 2x 2 A PM, DIQ 4x, CM 1x IO-Link, M12-L, PROFIsafe up to PL e (ISO 13849) / SIL 3 (IEC 61508), degree of protection IP65/67 and IP69K, including eCoding plug-in connector

General information
HW functional status		from FS01
Firmware version		V1.1.x
● FW update possible		Yes
Vendor identification (VendorID)		002AH
Device identifier (DeviceID)		0306H
Product function
● I&M data		Yes; I&M0 to I&M3
● Isochronous mode		No
● IRT		No; module will participate within an IRT topology
● Fast startup		No
● Prioritized startup		No
Engineering with
● STEP 7 TIA Portal configurable/integrated from version		STEP 7 V20 or higher with HSP0468
● PROFINET from GSD version/GSD revision		GSDML V2.43 2025.05
Operating mode
● DI		Yes
● Counter		No
● DQ		Yes
● MSI		No
● MSO		No
Supply voltage
Rated value (DC)		24 V
Reverse polarity protection		Yes
power supply according to NEC Class 2 required		No
Load voltage 1L+
● Rated value (DC)		24 V
● permissible range, lower limit (DC)		20.4 V
● permissible range, upper limit (DC)		28.8 V
● Reverse polarity protection		Yes; Against destruction; encoder power supply outputs applied with reversed polarity
Load voltage 2L+
● Rated value (DC)		24 V
● permissible range, lower limit (DC)		20.4 V
● permissible range, upper limit (DC)		28.8 V
● Reverse polarity protection		Yes; against destruction
Input current
Current consumption (rated value)		100 mA 1L+ without load; 45 mA 2L+ without load
from load voltage 1L+ (unswitched voltage)		12 A; Maximum value
from load voltage 2L+, max.		12 A; Maximum value
Encoder supply
Number of outputs		6; Us0, Us1, Vs0 - Vs3
24 V encoder supply
● Short-circuit protection		Yes; per channel, electronic
● Output current, max.		0.5 A
Actuator supply
Number of outputs		3; Us2 - Us4
Short-circuit protection		Yes; per channel, electronic
Output current
● Rated value		1 A
Power loss
Power loss, typ.		12 W