New

6ES7146-6HF00-0BB0

Condition: New product

More info

Siemens 6ES7146-6HF00-0BB0

SIMATIC ET 200eco PN, AI 6x U/I + AIQ 2x U/I, M12-L, 8x M12, 16-bit resolution, channel diagnostics for wire break and short-circuit, shared device with 2 controllers, prioritized startup, MSI, MSO, MRP, S2 redundancy, I&M0...3, multi-fieldbus, PN IO, Ethernet IP, Modbus TCP, degree of protection IP67 / IP69K

General information
HW functional status		FS02
Firmware version		V5.1.x
● FW update possible		Yes
Vendor identification (VendorID)		002AH
Device identifier (DeviceID)		0306H
Manufacturer ID according to ODVA (VendorID)		04E3H
Device ID according to ODVA (Product code)		0FABH
Product function
● I&M data		Yes; I&M0 to I&M3
● Isochronous mode		No
● IRT		Yes
● Prioritized startup		Yes
Engineering with
● STEP 7 TIA Portal configurable/integrated from version		STEP 7 V18 or higher with HSP 0391
● PROFINET from GSD version/GSD revision		GSDML V2.4.x
● Multi Fieldbus Configuration Tool (MFCT)		V1.5 or higher
Operating mode
● MSI		Yes
● MSO		Yes
CiR - Configuration in RUN
Calibration possible in RUN		Yes
Supply voltage
power supply according to NEC Class 2 required		No
Load voltage 1L+
● Rated value (DC)		24 V
● permissible range, lower limit (DC)		20.4 V
● permissible range, upper limit (DC)		28.8 V
● Reverse polarity protection		Yes; against destruction
Input current
Current consumption (rated value)		110 mA; without load
from load voltage 1L+ (unswitched voltage)		12 A; Maximum value
from load voltage 2L+, max.		12 A; Maximum value
Encoder supply
Number of outputs		8
24 V encoder supply
● Short-circuit protection		Yes; per channel, electronic
● Output current, max.		0.5 A; total current for encoder and actuator supply: 2 A
Actuator supply
Number of outputs		2
Short-circuit protection		Yes; per channel, electronic
Output current
● Rated value		0.5 A; total current for encoder and actuator supply: 2 A
Power loss
Power loss, typ.		6.9 W