New

6ES7414-3FM07-0AB0

Condition: New product

More info

Siemens 6ES7414-3FM07-0AB0

SIMATIC S7-400, CPU414F-3 PN/DP Central processing unit with: Work memory 4 MB, (2 MB code, 2 MB data), interfaces 1st interface MPI/DP 12 Mbit/s, (X1), 2nd interface Ethernet/PROFINET (X5) 3rd interface IF 964-DP plug-in (IF1)

General information
Product type designation		CPU 414F-3 PN/DP
HW functional status		01
Firmware version		V7.0
Product function
● Isochronous mode		Yes; Via PROFIBUS DP or PROFINET interface
Engineering with
● Programming package		STEP 7 V5.5 or higher with HSP 262
CiR - Configuration in RUN
CiR synchronization time, basic load		100 ms
CiR synchronization time, time per I/O byte		15 µs
Supply voltage
Rated value (DC)		Power supply via system power supply
Input current
from backplane bus 5 V DC, typ.		1.3 A
from backplane bus 5 V DC, max.		1.6 A
from backplane bus 24 V DC, max.		300 mA; 150 mA per DP interface
from interface 5 V DC, max.		90 mA; At each DP interface
Power loss
Power loss, typ.		6.5 W
Memory
Type of memory		RAM
Work memory
● integrated		4 Mbyte
● integrated (for program)		2 Mbyte
● integrated (for data)		2 Mbyte
● expandable		No
Load memory
● expandable FEPROM		Yes; with Memory Card (FLASH)
● expandable FEPROM, max.		64 Mbyte
● integrated RAM, max.		512 kbyte
● expandable RAM		Yes; with Memory Card (RAM)
● expandable RAM, max.		64 Mbyte
Backup
● present		Yes
● with battery		Yes; all data
● without battery		No
Battery
Backup battery
● Backup current, typ.		180 µA; up to 40 °C
● Backup current, max.		850 µA
● Backup time, max.		Dealt with in the module data manual with the secondary conditions and the factors of influence
● Feeding of external backup voltage to CPU		5 V DC to 15 V DC