Call to us

Close (x)
6ES7924-0BE20-0BA0
New

6ES7924-0BE20-0BA0

New product

Siemens 6ES7924-0BE20-0BA0

Connection module TPRI with relay 230 V AC, Output 8 NO contacts 24V DC/0.05 A Type: Screw terminal with LED, VPE=1 unit 16 pole IDC connection for cable

Technical Product Detail Page https://i.siemens.com/1P6ES7924-0BE20-0BA0
target system SIMATIC S7-300 / 1500
suitability for use Digital input module
product type designation Fully modular connection
product designation Connection module
electrical data
operating voltage
● at AC / rated value 230 V; for coil
ampacity / per pin / maximum 1 A
continuous current / at DC / per signal cable / maximum 0.05 A
switching capacity current / of the contacts / with resistive load / maximum 0.05 A; for 24V AC; recommended minimal load larger than 5mA
relay design For input signals
type of switching contact Single contact, NO contact
number of relay outputs 8
operating frequency / maximum 8.33 1/s
mechanical service life (operating cycles) / typical 10 000 000
electrical endurance (operating cycles) / typical 3 000 000; for AC 230 V/50 mA/Cos phi = 1
display version
● as status display of the inputs/outputs LED yellow for "active high"
● for power supply / power LED Yes; green for 24 V DC O.K.
product function / infeed function Yes
product component
● PE connection No
● shield connection No
● disconnector No
● protective wiring No
product feature / cross-connectable No
connection method
number of terminals 20; 8 x I x 2; 2 x L+, 2 x M
number of channels 8
type of connecting terminal Screw-type terminal
position / of the terminal Top
number of terminal levels 1
design of terminal / terminal levels internally linked No
type of electrical connection / for connecting cable Plug-in connection
number of poles / at the 1st interface 16; IDC connector with installed strain relief for the connecting cable
number of the plug contacts / of the electrical connection 1
wire length / maximum 30 m; between front connector module and Connection module
type of connectable conductor cross-sections / solid No
connectable conductor cross-section
● for flexible conductor / with core end processing 0.5 ... 2.5 mm²; End sleeve according to DIN 46228/1
● stranded 0.5 ... 2.5 mm²
● finely stranded / with core end processing 0.5 ... 2.5 mm²
number of cables / per connection 2; Connection for internal system: Combination of 1 or 2 Wires until the sum total of cross sections be achieved in a ferrule.
width of screwdriver blade 3.5 mm
tightening torque 0.4 ... 0.5 N·m
standards, specifications, approvals
certificate of suitability
● cULus approval Yes
design tested acc. to type of protection / EEx e No
overvoltage category 2
degree of pollution 2
combustibility class according to UL 94 V1

Siemens satış, Siemens sales, Siemens distribütör, Siemens Türkiye

30 other products in the same category: