New

6ES7924-0BF20-0BC0

Condition: New product

More info

Siemens 6ES7924-0BF20-0BC0

Connection module TPOO with optocoupler 24 VDC, Output 8 NO contacts 24V DC/4 A Overload and short circuit-proof, with LED Push-in terminal VPE = 1 unit 16 pole IDC connector f. cable

Technical Product Detail Page		https://i.siemens.com/1P6ES7924-0BF20-0BC0
target system		SIMATIC S7-300 / 1500
suitability for use		Digital output module
product type designation		Fully modular connection
product designation		Connection module
electrical data
operating voltage
● at DC / rated value		24 V; for coil
● rated value		24 V
● at DC / maximum		28.8 V
ampacity / per pin / maximum		1 A
continuous current / at DC / per signal cable / maximum		4 A
total current / maximum		32 A; any, except overhead; voltage feed each group of four max. 16A
switching capacity current / of the contacts / with resistive load / maximum		4 A; for 24V DC
type of switching contact		Optocoupler
operating frequency / maximum		500 1/s
display version
● as status display of the inputs/outputs		LED yellow for "active high"
● for power supply / power LED		Yes; green for 24 V DC O.K.
product function / infeed function		Yes
product component
● PE connection		No
● shield connection		No
● disconnector		No
product feature / cross-connectable		No
connection method
number of terminals		22; 8 x O; 2 x L+, 2 x M; 10 x special terminals
number of channels		8
type of connecting terminal		push-in
position / of the terminal		Top
number of terminal levels		1
design of terminal / terminal levels internally linked		No
type of electrical connection / for connecting cable		Plug-in connection
number of poles / at the 1st interface		16; IDC connector with installed strain relief for the connecting cable
number of the plug contacts / of the electrical connection		1
wire length / maximum		30 m; between front connector module and Connection module
type of connectable conductor cross-sections / solid		No
connectable conductor cross-section
● for flexible conductor / with core end processing		0.2 ... 2.5 mm²; End sleeve according to DIN 46228/1 or DIN 46228/4 with plastic collar
● stranded		0.2 ... 2.5 mm²
● finely stranded / without core end processing		0.2 ... 2.5 mm²
● finely stranded / with core end processing		0.2 ... 2.5 mm²
number of cables / per connection		2; Connection for internal system: Combination of 1 or 2 Wires until the sum total of cross sections be achieved in a ferrule.
width of screwdriver blade		3.5 mm
standards, specifications, approvals
certificate of suitability
● cULus approval		Yes
design tested acc. to type of protection / EEx e		No
overvoltage category		2
degree of pollution		2
combustibility class according to UL 94		V1
standards, specifications, approvals / Environmental Product Declaration
Environmental Product Declaration		Yes
global warming potential [CO2 eq]
● total		286.2 kg
● during manufacturing		1.6 kg
● during operation		284.4 kg
● after end of life		0.15 kg
ambient conditions
ambient temperature
● during operation		0 ... 60 °C
● during storage		-40 ... +70 °C