New
6ES7158-3AD10-0XA0
New product
Siemens 6ES7158-3AD10-0XA0
| General information | ||
| Product type designation | PN/PN coupler | |
| Firmware version | V6.0 | |
| ● FW update possible | Yes | |
| Vendor identification (VendorID) | 002AH | |
| Device identifier (DeviceID) | 0604H | |
| Product function | ||
| ● I&M data | Yes; I&M0 to I&M3 | |
| ● Isochronous mode | Yes; 500 µs | |
| ● Tool changer | Yes; Docking station and docking unit | |
| ● Local coupling, IO data | Yes | |
| — Number of coupling modules | 16; in non-isochronous mode, otherwise 3 | |
| — Number of coupling submodules per module | 4; 1x write, 3x read in non-isochronous mode, otherwise see description in the manual | |
| ● Local coupling, data records | Yes; in non-isochronous mode | |
| — Number of coupling modules | 16 | |
| — Number of coupling submodules per module | 4; 1x write, 3x read | |
| — Record length, max. | 4 096 byte | |
| — FIFO depth in storage mode | 8 | |
| Engineering with | ||
| ● STEP 7 TIA Portal configurable/integrated from version | V20 or higher | |
| ● STEP 7 configurable/integrated from version | V5.7 SP3 | |
| ● PROFINET from GSD version/GSD revision | GSDML V2.4.x | |
| Installation type/mounting | ||
| Mounting | Mounting rail 7.5 mm and 15 mm | |
| Supply voltage | ||
| Rated value (DC) | 24 V | |
| permissible range, lower limit (DC) | 19.2 V | |
| permissible range, upper limit (DC) | 28.8 V | |
| Reverse polarity protection | Yes | |
| Mains buffering | ||
| ● Mains/voltage failure stored energy time | 10 ms | |
| Input current | ||
| Current consumption, max. | 360 mA; For 19.2 V input voltage at the right-hand supply terminal, including 2 plugged BA 2x LC | |
| Inrush current, max. | 1.6 A | |
| I²t | 0.031 A²·s | |
| from supply voltage 1L+, max. | 320 mA; For 19.2 V input voltage at the left-hand supply terminal, including 2 plugged BA 2x LC | |
| Power loss | ||
| Power loss, typ. | 4 W; For 24 V input voltage and 2 plugged BA 2x RJ45 If BusAdapters with an optical interface are plugged, there is an additional 750 mW per optical interface (3 W with 2 plugged BA 2x LC) | |
| Address area | ||
| Address space per module | ||
| ● Address space per module, max. | 254 byte; max. 254 bytes of input data and 253 bytes of output data | |
| Address space per station | ||
| ● Address space per station, max. | 1 440 byte; per input / output | |
| Hardware configuration | ||
| Submodules | ||
| ● Number of submodules per station, max. | 116 | |
| Interfaces | ||
| Number of PROFINET interfaces | 2; One PROFINET interface per line side | |
| Optical interface | Yes; Via SIMATIC BusAdapter | |
| Transmission rate, max. | 100 Mbit/s | |
Siemens satış, Siemens sales, Siemens distribütör, Siemens Türkiye
